E-TECH Engine Enamel
E-TECH Engine Enamel is a high-quality, long-lasting gloss paint specially formulated with ceramic resin to withstand temperatures up to 250°C. Ideal for painting engine blocks, rocker covers, gear casings, brackets, and other metal components, it delivers a durable finish that resists oil, fuel additives, road salt, and weathering.
Available in 16 popular colours
- Long-lasting high-gloss finish
- Easy to apply – brush-on application
- Chip and crack resistant formula
- Resists oil, chemicals, road salt, and engine heat
- Heat resistant up to 250°C
Preparation
- Ensure the engine/parts and paint are at room temperature (17–21°C)
- Apply in a warm, dry, dust-free area
- Use a steel brush to remove rust, dirt, and loose debris
- Clean thoroughly with a degreaser to remove oil, grease, dirt, and silicone
- Mask off any areas that should not be painted
- Ensure the surface is completely dry and clean before application
- For aluminium or smooth/rusty surfaces, use E-TECH Etch Primer (Part No: ER00112) for proper adhesion
Application
- Stir paint thoroughly for at least 2 minutes before use
- Apply in thin, even coats using a brush – avoid runs or drips
- Allow 30 minutes drying time between coats
- Apply 2–3 coats or until the desired finish is achieved
- Allow a minimum of 2 hours for the enamel to dry fully before starting the engine
- Only operate the engine once the enamel is completely dry and cured