Brake Caliper Paint - Grey

Product code: INPEBCP-GRY

3 in stock

GBP new

£20.99

£17.49 ex. VAT

Add to Basket

E-TECH Brake Caliper Paint

The E-TECH Brake Caliper Paint is a high-performance one-part paint system specially developed for brake calipers and wheel hubs. No mixing, no hardeners, and no primer required — simply stir and apply. This easy-to-use paint offers a stunning high-gloss finish* and durable protection that enhances the look of your vehicle's brake components.

The paint resists corrosion, brake dust, road salt, oil, and common cleaning chemicals. It is heat resistant up to 220°C and can be resealed for future touch-ups or repairs.

*Gloss finish except for matt colour options.

Available in 20 popular colours.

• High quality one-part paint – no mixing required
• Resistant to brake dust, road salt, oil, and chemicals
• Withstands heat up to 220°C
• Lead-free formula
• No need to dismantle brake parts
• Provides a long-lasting, high gloss finish
• Easy to clean and maintain

Preparation

• Remove wheels according to your vehicle’s guidelines.
• Use a wire brush to remove rust, dirt, and loose debris from calipers or hubs.
• Clean the area thoroughly using a brake parts cleaner — remove all grease, dust, brake fluid, and oil.
• It is not necessary to remove the calipers, but mask off hoses, bleed screws, and rubber components.
• Open paint tin and stir thoroughly before application.

Applying the Paint

• Ensure surface is dry before painting.
• Apply thin, even coats using the brush provided. Avoid drips and runs.
• Wait 30 minutes between coats. Apply 2–3 coats or until desired finish is achieved.
• Allow to dry for 2 hours before refitting wheels.
• Do not drive vehicle for 24 hours to allow full curing of paint.

Important Warnings

• Do not inhale brake dust – always wear appropriate safety gear and work in a well-ventilated area.
• Do not apply paint to brake discs, pads, or shoes. If contact occurs, clean or replace affected parts immediately.
• Brake cleaner must not be used as an engine degreaser.
• Do not use this paint on parts exceeding 220°C such as turbos, manifolds, or exhausts.